Milwaukee M18FPD3-0 Replacement Chuck

The Milwaukee M18FPD3-0 is a high-performance percussion drill, and over time, its chuck may require replacement due to wear or damage. For optimal performance and compatibility, it's recommended to use a genuine Milwaukee replacement chuck.

Installation Tips

Replacing the chuck involves removing the existing one, which can be secured tightly due to thread-locking compounds. Here’s a general guide:

1. Remove the Chuck Screw:
   Inside the chuck, there’s a retaining screw (often with a Torx head) that secures it to the spindle. This screw typically has a left-hand thread, so turn it clockwise to loosen.
2. Detach the Chuck:
   After removing the screw, insert a sturdy Allen key into the chuck and tighten it. Using a mallet or a cheater bar, apply force to the Allen key in a counter-clockwise direction to loosen the chuck.

Caution: If you’re not experienced with tool maintenance, it’s advisable to consult a professional technician or refer to Milwaukee’s official service centres to avoid potential damage.

FAQs

• Is this chuck compatible with other Milwaukee drills?
  • Yes, this chuck is compatible with various models within the M18 range. Always verify compatibility before purchasing.
• What is the maximum bit capacity?
  • The chuck can securely hold drill bits ranging from 1.5mm to 13mm.
• Is this chuck keyless?
  • Yes, it is a keyless chuck, allowing for quick and easy bit changes.
• Does the replacement chuck come with installation tools?
  • No, installation tools such as a Torx screwdriver and an Allen key are not included.