Powerhand SIN-403.0212 Thread Extractor Set M6-M16 25pc

Drill it true, then wind it out. The Powerhand SIN-403.0212 is a 25-piece thread extractor set covering M6 to M16, built around five reverse-spline extractors and the drilling guides that make them work — because the reason an extraction goes wrong is almost always a pilot hole that wandered off centre.

The extractors are hardened steel with reverse splines that bite deeper into the fastener the further you turn them counter-clockwise. Five matched drill bits cut the pilot hole, ten guides keep it centred, and five unwinding tools back the extractor out once the broken fastener is free.

Key Features

• 25-piece set covering fastener sizes M6 to M16
• 5 extractors with reverse splines that dig into the screw as you turn counter-clockwise
• 10 guides for correct drilling — centre the bit so the pilot hole goes in true
• 5 matched drill bits for preparing the pilot hole
• 5 tools to unwind the extractor once the broken fastener is out
• Manufactured from hardened steel to handle high-torque use without breaking
• Designed to grip and remove damaged or stripped screws and bolts
• Everything needed for the full extraction sequence in one case
• 0.7kg complete, in a 200 x 130 x 30mm case

For vehicle technicians, maintenance engineers and workshops dealing with sheared or stripped fasteners. Extractors are consumable by design — they are meant to be sacrificed to save the component.

Technical Specification

• Pieces — 25
• Size Coverage — M6 to M16
• Contents — 5 x extractor, 5 x drill bit, 10 x drilling guide, 5 x unwinding tool
• Extractor Design — Reverse spline
• Direction of Use — Counter-clockwise
• Material — Hardened steel
• Weight — 0.7kg
• Case Size (L x W x H) — 200 x 130 x 30mm
• Warranty — Consumable item, not covered by warranty
• Manufacturer Code (MPN) — SIN-403.0212