Sealey VS7112 Oil Filter Cap Wrench Ø64.5mm 14 Flutes 3/8"Sq - Lexus/Toyota

The Lexus and Toyota cap, sized properly. The Sealey VS7112 is a cap-type oil filter wrench for Ø64.5mm housing caps with 14 flutes, engaging the flutes moulded into the cap rather than gripping the outside — so the cap comes off intact instead of scored, crushed or rounded.

It is machined from aluminium alloy specifically to keep the risk of damage to the filter housing down, since a steel wrench on a plastic housing rarely ends well. The crowned top adds leverage points for a cap that has been overtightened, and the 3/8" square drive takes any standard ratchet or breaker bar.

Key Features

• Cap type oil filter wrench for Lexus and Toyota filter housings
• Ø64.5mm with 14 flutes
• Engages the flutes on the cap rather than gripping the body
• Crowned top provides extra leverage points for removing stubborn oil filter housing caps
• Aluminium alloy material minimises the risk of damage to the filter housing
• 3/8" square drive fits any standard ratchet or breaker bar
• Sits in the confined space around a filter housing where a strap or chain wrench will not
• Correct flute count matters — a near fit will round the cap and turn a service into a repair
• 0.19kg

For servicing garages, vehicle technicians and Lexus or Toyota owners doing their own oil changes. Sealey also list a Toyota-only version, the VS7111, in the same Ø64.5mm and 14 flute size — if you are matching to a specific vehicle rather than a cap you have measured, check both against your housing.

Technical Specification

• Type — Cap type oil filter wrench
• Size — Ø64.5mm
• Flutes — 14
• Drive — 3/8" square
• Material — Aluminium alloy
• Application — Lexus/Toyota
• Nett Weight — 0.19kg
• Manufacturer Code (MPN) — VS7112